Nonoxynol9QualityChecker

Nonoxynol9

assay contraceptives fixed-dose combinations heavy metals hormones impurities residual solvents

Nonoxynol-9 Quality Checker — Nonoxynol-9 (Spermicidal Surfactant) (Ph. Eur. 2.8.1)

ℹ️ The utility checks assay, critical impurities (nonylphenol, 1,4-dioxane, ethylene/propylene oxide), physicochemical parameters (hydroxyl/acid value, peroxide value, refractive index, density).
ℹ️ Does not use machine learning — rule-based logic only.
⚠️ CRITICAL: Nonylphenol (≤0.1%) — ENDORINE DISRUPTOR! 1,4-Dioxane (≤10 ppm) — CARCINOGEN! Peroxide value (≤5.0) — oxidation control! Nonoxynol-9 NOT recommended for rectal use (HIV risk)!

Usage:
Nonoxynol9QualityChecker.exe → demo mode (console output)
Nonoxynol9QualityChecker.exe input.csv output.json → evaluate your data

Input format:
BatchNumber,AssayPercent,NonylphenolPercent,DioxanePPM,EthyleneOxidePPM,PropyleneOxidePPM,HeavyMetalsPPM,LossOnDryingPercent,SulfatedAshPercent,HydroxylValue,AcidValue,PeroxideValue,RefractiveIndex,DensityGPerMl,ColorAPHA,EthanolPPM,AcetonePPM

Example:
NO9-2026-001,99.5,0.05,5,0.5,0.3,10,0.5,0.05,58.0,0.8,3.0,1.490,1.060,50,800,500

— WHY IS THIS NEEDED?
Nonoxynol-9 — nonionic surfactant used as spermicide in:
• Vaginal gels, creams, films (Emko, Pharmatex)
• Condoms with spermicidal lubricant
• Diaphragms and caps with application
⚠️ CRITICAL:
• Nonylphenol ≤0.1% — ENDORINE DISRUPTOR! Disrupts hormonal balance, toxic to reproductive system. Mandatory control!
• 1,4-Dioxane ≤10 ppm — CARCINOGEN group 2A (IARC)! Forms during ethoxylation. Strict limit!
• Ethylene oxide/propylene oxide ≤1 ppm — residual monomers, potential carcinogens
• Peroxide value ≤5.0 mmol/kg — nonoxynol-9 oxidation-sensitive! High value = reduced spermicidal activity + toxic products
• Hydroxyl value 50–65 mg KOH/g — confirms degree of ethoxylation (~9)
⚠️ Special attention: WHO and FDA DO NOT recommend nonoxynol-9 for rectal use! Damages rectal mucosa, increases HIV infection risk 2–5 times. Use only for vaginal contraception with informed consent.
Critical parameters:
• Assay: 98.0–102.0%
• Nonylphenol: ≤0.1% (ENDOCRINE DISRUPTOR!)
• 1,4-Dioxane: ≤10 ppm (CARCINOGEN!)
• Ethylene oxide: ≤1 ppm
• Propylene oxide: ≤1 ppm
• Heavy metals: ≤20 ppm
• Loss on drying: ≤1.0%
• Sulfated ash: ≤0.1%
• Hydroxyl value: 50–65 mg KOH/g
• Acid value: ≤1.0 mg KOH/g
• Peroxide value: ≤5.0 mmol/kg (oxidation control!)
• Refractive index: 1.485–1.495
• Density (25°C): 1.050–1.070 g/mL
• Color: ≤100 APHA
• Residual solvents: ethanol ≤5000 ppm, acetone ≤5000 ppm
⚠️ Note: Nonoxynol-9 is a MIXTURE of polyethylene glycol ethers of nonylphenol with average ethoxylation degree 9. Assay determined as sum of HPLC peaks. Impurity control critical for safety! Store in tightly closed container, protected from light and moisture. Analyze quickly — oxidation-sensitive.

input.csv

BatchNumber,AssayPercent,NonylphenolPercent,DioxanePPM,EthyleneOxidePPM,PropyleneOxidePPM,HeavyMetalsPPM,LossOnDryingPercent,SulfatedAshPercent,HydroxylValue,AcidValue,PeroxideValue,RefractiveIndex,DensityGPerMl,ColorAPHA,EthanolPPM,AcetonePPM
NO9-2026-001,99.5,0.05,5,0.5,0.3,10,0.5,0.05,58.0,0.8,3.0,1.490,1.060,50,800,500

URS & FS — user requirements and functional specification

This document defines user requirements and functional specification for the quality-control utility. It supports deployment discussion, IQ/OQ preparation and QC workflow integration.

Utility: Nonoxynol9QualityCheckerAPI / object: Nonoxynol9Category: Contraceptives

1. Scope

The Nonoxynol9 Quality Checker utility is used for Nonoxynol9. The actual input.csv is the source of truth for the input structure; control criteria are defined by the executable and the domain description.

The utility does not use machine learning; decisions are produced by deterministic rules.

Categories: Contraceptives

Tags: assay, contraceptives, fixed-dose combinations, heavy metals, hormones, impurities, residual solvents

2. Execution modes

Nonoxynol9QualityChecker.exe                            → demo mode (console output)
Nonoxynol9QualityChecker.exe input.csv output.json      → evaluate your data

3. Key controlled areas

assay / content
residual solvents
heavy metals / elemental impurities
pH and physicochemical parameters

4. Domain limits and critical parameters

⚠️ CRITICAL: Nonylphenol (≤0.1%) — ENDORINE DISRUPTOR! 1,4-Dioxane (≤10 ppm) — CARCINOGEN! Peroxide value (≤5.0) — oxidation control! Nonoxynol-9 NOT recommended for rectal use (HIV risk)!
⚠️ CRITICAL:
Nonylphenol ≤0.1% — ENDORINE DISRUPTOR! Disrupts hormonal balance, toxic to reproductive system. Mandatory control!
1,4-Dioxane ≤10 ppm — CARCINOGEN group 2A (IARC)! Forms during ethoxylation. Strict limit!
Ethylene oxide/propylene oxide ≤1 ppm — residual monomers, potential carcinogens
Peroxide value ≤5.0 mmol/kg — nonoxynol-9 oxidation-sensitive! High value = reduced spermicidal activity + toxic products
Hydroxyl value 50–65 mg KOH/g — confirms degree of ethoxylation (~9)
⚠️ Special attention: WHO and FDA DO NOT recommend nonoxynol-9 for rectal use! Damages rectal mucosa, increases HIV infection risk 2–5 times. Use only for vaginal contraception with informed consent.
Critical parameters:
Assay: 98.0–102.0%
Nonylphenol: ≤0.1% (ENDOCRINE DISRUPTOR!)
1,4-Dioxane: ≤10 ppm (CARCINOGEN!)
Ethylene oxide: ≤1 ppm
Propylene oxide: ≤1 ppm
Heavy metals: ≤20 ppm
Loss on drying: ≤1.0%
Sulfated ash: ≤0.1%
Hydroxyl value: 50–65 mg KOH/g
Acid value: ≤1.0 mg KOH/g
Peroxide value: ≤5.0 mmol/kg (oxidation control!)
Refractive index: 1.485–1.495
Density (25°C): 1.050–1.070 g/mL
Color: ≤100 APHA
Residual solvents: ethanol ≤5000 ppm, acetone ≤5000 ppm

Limits stated in the description must be verified against the current approved specification, pharmacopoeial monograph and registration dossier before production use.

5. URS — user requirements

ID	Requirement	Criticality	Acceptance criterion
URS-001	The system shall accept an `input.csv` file for Nonoxynol9 with the exact columns listed in the “Input data contract” section.	High	A file with the correct header is processed without manual editing; missing mandatory columns produce FAIL/import error.
URS-002	The system shall support execution without arguments in demo mode and execution with `input.csv output.json` for user data.	Medium	Both execution scenarios produce a predictable result or clear diagnostic error.
URS-003	The system shall perform rule-based controls for: assay / content, residual solvents, heavy metals / elemental impurities, pH and physicochemical parameters.	High	Each controlled parameter receives a status and message; the result does not depend on hidden Excel formulas or ML.
URS-004	The system shall preserve traceability between batch/lot, source values, applied rules and final verdict.	High	Output includes batch identifier, source values, parameter statuses and critical findings.
URS-005	The system shall generate machine-readable `output.json` for LIMS/ELN/MES, batch record and QA/QC review.	High	JSON contains overall status, check array, warnings, failures and source-file reference.
URS-006	The system shall support use in the client validation package: URS/FS, IQ/OQ preparation, installation and operational scenario checks.	High	The document, test scenarios and reproducible CSV/JSON flow are suitable for audit and internal approval.
URS-007	The system shall clearly separate technical data errors from specification nonconformities.	Medium	Schema/type errors are not mixed with pharmacopoeial deviations and are reported separately.

6. input.csv data contract

The source of truth for the input schema is the actual input.csv header. Column names are technical identifiers and are not translated.

#	Column	Type	Unit	Description	Sample	Control rule
1	`BatchNumber`	identifier	as specified	Batch Number	`NO9-2026-001`	mandatory field; used for batch/lot traceability
2	`AssayPercent`	decimal	%	Assay %	`99.5`	numeric value; compared with assay/purity limit from specification or method
3	`NonylphenolPercent`	decimal	%	Nonylphenol %	`0.05`	mandatory numeric value; rule comparison is performed by the utility
4	`DioxanePPM`	decimal	ppm	Dioxane PPM	`5`	mandatory numeric value; rule comparison is performed by the utility
5	`EthyleneOxidePPM`	decimal	ppm	Ethylene Oxide PPM	`0.5`	mandatory numeric value; rule comparison is performed by the utility
6	`PropyleneOxidePPM`	decimal	ppm	Propylene Oxide PPM	`0.3`	mandatory numeric value; rule comparison is performed by the utility
7	`HeavyMetalsPPM`	decimal	ppm	Heavy Metals PPM	`10`	numeric value; checked as elemental/metal impurity
8	`LossOnDryingPercent`	decimal	%	Loss On Drying %	`0.5`	mandatory numeric value; rule comparison is performed by the utility
9	`SulfatedAshPercent`	decimal	%	Sulfated Ash %	`0.05`	mandatory numeric value; rule comparison is performed by the utility
10	`HydroxylValue`	decimal	as specified	Hydroxyl Value	`58.0`	mandatory numeric value; rule comparison is performed by the utility
11	`AcidValue`	decimal	as specified	Acid Value	`0.8`	mandatory numeric value; rule comparison is performed by the utility
12	`PeroxideValue`	decimal	as specified	Peroxide Value	`3.0`	mandatory numeric value; rule comparison is performed by the utility
13	`RefractiveIndex`	decimal	as specified	Refractive Index	`1.490`	mandatory numeric value; rule comparison is performed by the utility
14	`DensityGPerMl`	decimal	as specified	Density GPer Ml	`1.060`	mandatory numeric value; rule comparison is performed by the utility
15	`ColorAPHA`	decimal	as specified	Color APHA	`50`	mandatory numeric value; rule comparison is performed by the utility
16	`EthanolPPM`	decimal	ppm	Ethanol PPM	`800`	numeric value; checked as residual solvent against the applicable limit
17	`AcetonePPM`	decimal	ppm	Acetone PPM	`500`	numeric value; checked as residual solvent against the applicable limit

CSV example

BatchNumber,AssayPercent,NonylphenolPercent,DioxanePPM,EthyleneOxidePPM,PropyleneOxidePPM,HeavyMetalsPPM,LossOnDryingPercent,SulfatedAshPercent,HydroxylValue,AcidValue,PeroxideValue,RefractiveIndex,DensityGPerMl,ColorAPHA,EthanolPPM,AcetonePPM
NO9-2026-001,99.5,0.05,5,0.5,0.3,10,0.5,0.05,58.0,0.8,3.0,1.490,1.060,50,800,500

7. FS — functional specification

ID	Function	Implementation description
FS-001	CLI entry point	The executable `Nonoxynol9QualityChecker.exe` supports demo mode and `input.csv output.json` processing mode.
FS-002	CSV parser	The import module reads CSV, validates header, column presence/order, value count and encoding. Decimal values are expected with a dot separator.
FS-003	Field conversion	Each column is converted to the expected type: identifier, text, decimal number, date/time or boolean flag.
FS-004	Domain rule engine	For Nonoxynol9, explicit rules are applied: range, minimum, maximum, absence of prohibited flag, data completeness or calculation-based check.
FS-005	Criticality handling	Critical violations produce FAIL; non-critical deviations and incomplete data produce WARNING; full conformance produces PASS.
FS-006	JSON writer	`output.json` stores overall status, per-parameter results, source values, warnings, failures and diagnostic messages.
FS-007	Integration contract	The CSV → JSON format is stable for invocation from LIMS/ELN/MES, scheduled task or wrapper service.
FS-008	Error handling	Schema error, missing file, non-numeric value or JSON write failure returns diagnosable error without silent PASS.

8. output.json contract

The output file must be suitable for automated processing, audit review and correlation with the source input.csv row.

{
  "utility": "Nonoxynol9QualityChecker",
  "api": "Nonoxynol9",
  "batchNumber": "NO9-2026-001",
  "overallStatus": "PASS|WARNING|FAIL",
  "checkedAtUtc": "2026-05-18T00:00:00Z",
  "checks": [
    {
      "parameter": "BatchNumber",
      "value": "NO9-2026-001",
      "unit": "as specified",
      "status": "PASS|WARNING|FAIL",
      "message": "Rule-based check result"
    },
    {
      "parameter": "AssayPercent",
      "value": "99.5",
      "unit": "%",
      "status": "PASS|WARNING|FAIL",
      "message": "Rule-based check result"
    },
    {
      "parameter": "NonylphenolPercent",
      "value": "0.05",
      "unit": "%",
      "status": "PASS|WARNING|FAIL",
      "message": "Rule-based check result"
    },
    {
      "parameter": "DioxanePPM",
      "value": "5",
      "unit": "ppm",
      "status": "PASS|WARNING|FAIL",
      "message": "Rule-based check result"
    },
    {
      "parameter": "EthyleneOxidePPM",
      "value": "0.5",
      "unit": "ppm",
      "status": "PASS|WARNING|FAIL",
      "message": "Rule-based check result"
    },
    {
      "parameter": "PropyleneOxidePPM",
      "value": "0.3",
      "unit": "ppm",
      "status": "PASS|WARNING|FAIL",
      "message": "Rule-based check result"
    },
    {
      "parameter": "HeavyMetalsPPM",
      "value": "10",
      "unit": "ppm",
      "status": "PASS|WARNING|FAIL",
      "message": "Rule-based check result"
    },
    {
      "parameter": "LossOnDryingPercent",
      "value": "0.5",
      "unit": "%",
      "status": "PASS|WARNING|FAIL",
      "message": "Rule-based check result"
    }
  ],
  "criticalFindings": [],
  "sourceFile": "input.csv"
}

9. OQ/PQ test scenarios

ID	Scenario	Expected result
TC-001	Valid CSV with expected header and sample row	All rows are processed; output contains PASS/WARNING/FAIL and parameter-level detail.
TC-002	A mandatory input.csv column is missing	Import is rejected or the row receives FAIL with schema reference.
TC-003	A numeric field contains text or a blank value	Type conversion error is recorded; the result is not hidden as PASS.
TC-004	A parameter is outside specification or critical limit	Critical parameters produce FAIL; non-critical deviations produce WARNING according to the rule.
TC-007	Residual solvent above applicable limit	FAIL is produced with solvent name and measured value.

10. QA/QC, CSV and change control

Before production use, the client records executable version, checksum, specification/monograph version, test CSV, expected JSON and IQ/OQ results.
Column names must not be changed without updating the validator and test scenarios.
The source CSV, output.json and utility version should be stored together as an evidence package.
Any change in control rules must go through change control and repeated OQ scenario verification.

Included in packages

Contraceptives QC Suite

Quality-control package for contraceptives: hormonal APIs, fixed combinations, implants, rings and intrauterine systems.

Open

Endocrinology QC Suite

QC package for endocrinology: thyroid, pituitary/peptide hormones, corticosteroids, sex hormones and selected metabolic medicines.

Open

Gynecology QC Suite

QC package for gynecology: hormones, contraceptives, uterotonics, anti-infectives and women’s-health medicines.

Open

Proctology QC Suite

QC package for proctology: local anaesthetics, corticosteroids, anti-inflammatory, anti-infective and supporting medicines for rectal dosage forms.

Open