RiboflavinQualityChecker

Riboflavin

assay heavy metals impurities minerals premix specification vitamins water quality

Riboflavin Quality Checker — Vitamin B2 (Ph. Eur. 2.8.1)

ℹ️ The utility checks assay, specific rotation, UV ratios, impurities (lumiflavin, lumichrome), loss on drying.
ℹ️ Does not use machine learning — rule-based logic only.
⚠️ Critical for vitamin products, dietary supplements, parenteral nutrition, infant nutrition.

Usage:
RiboflavinQualityChecker.exe → demo mode (console output)
RiboflavinQualityChecker.exe input.csv output.json → evaluate your data

Input format:
BatchNumber,AssayPercent,SpecificRotation,UV444_267,UV373_267,Lumiflavin,Lumichrome,TotalImpurities,LossOnDrying,HeavyMetals,pH,ClarityNTU,ColorAPHA,EthanolPPM,AcetonePPM

Example:
B2-2026-001,99.5,-125.0,0.33,0.32,0.05,0.03,0.5,1.0,10,6.8,2,30,800,500

— WHY IS THIS NEEDED?
Riboflavin (vitamin B2) is a water-soluble vitamin critical for:
• Energy metabolism (FAD, FMN — coenzymes of dehydrogenases)
• Skin, mucous membranes, eye health (conjunctivitis, keratitis in deficiency)
• Hemoglobin synthesis and anemia prevention
• Vitamin complexes, dietary supplements, parenteral nutrition
• Infant nutrition and fortified products (flour, cereals)
⚠️ Extremely light-sensitive! Degrades under light forming lumiflavin and lumichrome (fluorescent degradation products). Requires light protection during storage and analysis!
Critical parameters:
• Assay 98.0–102.0% (on dried basis)
• Specific rotation -135° to -115° (in 0.1M HCl — key identification parameter)
• UV maxima at 223, 267, 373, 444 nm
• UV ratio A444/A267: 0.30–0.36 (characteristic for riboflavin)
• UV ratio A373/A267: 0.30–0.36
• Lumiflavin ≤0.1% (photo-oxidation product — reduces activity)
• Lumichrome ≤0.1% (degradation product)
• Total impurities ≤1.0%
• Loss on drying ≤1.5%
• Heavy metals ≤20 ppm
• pH of 0.075% solution: 6.0–7.5
• Clarity ≤5 NTU, color ≤50 APHA
Monograph compliance is mandatory for registration. Store in dark, airtight packaging protected from light! Analysis must be performed under light-protected conditions (yellow glass, red light).

input.csv

BatchNumber,AssayPercent,SpecificRotation,UV444_267,UV373_267,Lumiflavin,Lumichrome,TotalImpurities,LossOnDrying,HeavyMetals,pH,ClarityNTU,ColorAPHA,EthanolPPM,AcetonePPM
B2-2026-001,99.5,-125.0,0.33,0.32,0.05,0.03,0.5,1.0,10,6.8,2,30,800,500

URS & FS — user requirements and functional specification

This document defines user requirements and functional specification for the quality-control utility. It supports deployment discussion, IQ/OQ preparation and QC workflow integration.

Utility: RiboflavinQualityCheckerAPI / object: RiboflavinCategory: Vitamins and minerals

1. Scope

The Riboflavin Quality Checker utility is used for Riboflavin. The actual input.csv is the source of truth for the input structure; control criteria are defined by the executable and the domain description.

The utility does not use machine learning; decisions are produced by deterministic rules.

Categories: Vitamins and minerals

Tags: assay, heavy metals, impurities, minerals, premix, specification, vitamins, water quality

2. Execution modes

RiboflavinQualityChecker.exe                            → demo mode (console output)
RiboflavinQualityChecker.exe input.csv output.json      → evaluate your data

3. Key controlled areas

assay / content
residual solvents
heavy metals / elemental impurities
pH and physicochemical parameters

4. Domain limits and critical parameters

⚠️ Critical for vitamin products, dietary supplements, parenteral nutrition, infant nutrition.
⚠️ Extremely light-sensitive! Degrades under light forming lumiflavin and lumichrome (fluorescent degradation products). Requires light protection during storage and analysis!
Critical parameters:
Assay 98.0–102.0% (on dried basis)
Specific rotation -135° to -115° (in 0.1M HCl — key identification parameter)
UV maxima at 223, 267, 373, 444 nm
UV ratio A444/A267: 0.30–0.36 (characteristic for riboflavin)
UV ratio A373/A267: 0.30–0.36
Lumiflavin ≤0.1% (photo-oxidation product — reduces activity)
Lumichrome ≤0.1% (degradation product)
Total impurities ≤1.0%
Loss on drying ≤1.5%
Heavy metals ≤20 ppm
pH of 0.075% solution: 6.0–7.5
Clarity ≤5 NTU, color ≤50 APHA

Limits stated in the description must be verified against the current approved specification, pharmacopoeial monograph and registration dossier before production use.

5. URS — user requirements

ID	Requirement	Criticality	Acceptance criterion
URS-001	The system shall accept an `input.csv` file for Riboflavin with the exact columns listed in the “Input data contract” section.	High	A file with the correct header is processed without manual editing; missing mandatory columns produce FAIL/import error.
URS-002	The system shall support execution without arguments in demo mode and execution with `input.csv output.json` for user data.	Medium	Both execution scenarios produce a predictable result or clear diagnostic error.
URS-003	The system shall perform rule-based controls for: assay / content, residual solvents, heavy metals / elemental impurities, pH and physicochemical parameters.	High	Each controlled parameter receives a status and message; the result does not depend on hidden Excel formulas or ML.
URS-004	The system shall preserve traceability between batch/lot, source values, applied rules and final verdict.	High	Output includes batch identifier, source values, parameter statuses and critical findings.
URS-005	The system shall generate machine-readable `output.json` for LIMS/ELN/MES, batch record and QA/QC review.	High	JSON contains overall status, check array, warnings, failures and source-file reference.
URS-006	The system shall support use in the client validation package: URS/FS, IQ/OQ preparation, installation and operational scenario checks.	High	The document, test scenarios and reproducible CSV/JSON flow are suitable for audit and internal approval.
URS-007	The system shall clearly separate technical data errors from specification nonconformities.	Medium	Schema/type errors are not mixed with pharmacopoeial deviations and are reported separately.

6. input.csv data contract

The source of truth for the input schema is the actual input.csv header. Column names are technical identifiers and are not translated.

#	Column	Type	Unit	Description	Sample	Control rule
1	`BatchNumber`	identifier	as specified	Batch Number	`B2-2026-001`	mandatory field; used for batch/lot traceability
2	`AssayPercent`	decimal	%	Assay %	`99.5`	numeric value; compared with assay/purity limit from specification or method
3	`SpecificRotation`	decimal	as specified	Specific Rotation	`-125.0`	mandatory numeric value; rule comparison is performed by the utility
4	`UV444_267`	decimal	as specified	UV444 267	`0.33`	mandatory numeric value; rule comparison is performed by the utility
5	`UV373_267`	decimal	as specified	UV373 267	`0.32`	mandatory numeric value; rule comparison is performed by the utility
6	`Lumiflavin`	decimal	as specified	Lumiflavin	`0.05`	mandatory numeric value; rule comparison is performed by the utility
7	`Lumichrome`	decimal	as specified	Lumichrome	`0.03`	mandatory numeric value; rule comparison is performed by the utility
8	`TotalImpurities`	decimal	as specified	Total Impurities	`0.5`	mandatory numeric value; rule comparison is performed by the utility
9	`LossOnDrying`	decimal	as specified	Loss On Drying	`1.0`	mandatory numeric value; rule comparison is performed by the utility
10	`HeavyMetals`	decimal	as specified	Heavy Metals	`10`	numeric value; checked as elemental/metal impurity
11	`pH`	decimal	pH	p H	`6.8`	mandatory numeric value; rule comparison is performed by the utility
12	`ClarityNTU`	decimal	as specified	Clarity NTU	`2`	mandatory numeric value; rule comparison is performed by the utility
13	`ColorAPHA`	decimal	as specified	Color APHA	`30`	mandatory numeric value; rule comparison is performed by the utility
14	`EthanolPPM`	decimal	ppm	Ethanol PPM	`800`	numeric value; checked as residual solvent against the applicable limit
15	`AcetonePPM`	decimal	ppm	Acetone PPM	`500`	numeric value; checked as residual solvent against the applicable limit

CSV example

BatchNumber,AssayPercent,SpecificRotation,UV444_267,UV373_267,Lumiflavin,Lumichrome,TotalImpurities,LossOnDrying,HeavyMetals,pH,ClarityNTU,ColorAPHA,EthanolPPM,AcetonePPM
B2-2026-001,99.5,-125.0,0.33,0.32,0.05,0.03,0.5,1.0,10,6.8,2,30,800,500

7. FS — functional specification

ID	Function	Implementation description
FS-001	CLI entry point	The executable `RiboflavinQualityChecker.exe` supports demo mode and `input.csv output.json` processing mode.
FS-002	CSV parser	The import module reads CSV, validates header, column presence/order, value count and encoding. Decimal values are expected with a dot separator.
FS-003	Field conversion	Each column is converted to the expected type: identifier, text, decimal number, date/time or boolean flag.
FS-004	Domain rule engine	For Riboflavin, explicit rules are applied: range, minimum, maximum, absence of prohibited flag, data completeness or calculation-based check.
FS-005	Criticality handling	Critical violations produce FAIL; non-critical deviations and incomplete data produce WARNING; full conformance produces PASS.
FS-006	JSON writer	`output.json` stores overall status, per-parameter results, source values, warnings, failures and diagnostic messages.
FS-007	Integration contract	The CSV → JSON format is stable for invocation from LIMS/ELN/MES, scheduled task or wrapper service.
FS-008	Error handling	Schema error, missing file, non-numeric value or JSON write failure returns diagnosable error without silent PASS.

8. output.json contract

The output file must be suitable for automated processing, audit review and correlation with the source input.csv row.

{
  "utility": "RiboflavinQualityChecker",
  "api": "Riboflavin",
  "batchNumber": "B2-2026-001",
  "overallStatus": "PASS|WARNING|FAIL",
  "checkedAtUtc": "2026-05-18T00:00:00Z",
  "checks": [
    {
      "parameter": "BatchNumber",
      "value": "B2-2026-001",
      "unit": "as specified",
      "status": "PASS|WARNING|FAIL",
      "message": "Rule-based check result"
    },
    {
      "parameter": "AssayPercent",
      "value": "99.5",
      "unit": "%",
      "status": "PASS|WARNING|FAIL",
      "message": "Rule-based check result"
    },
    {
      "parameter": "SpecificRotation",
      "value": "-125.0",
      "unit": "as specified",
      "status": "PASS|WARNING|FAIL",
      "message": "Rule-based check result"
    },
    {
      "parameter": "UV444_267",
      "value": "0.33",
      "unit": "as specified",
      "status": "PASS|WARNING|FAIL",
      "message": "Rule-based check result"
    },
    {
      "parameter": "UV373_267",
      "value": "0.32",
      "unit": "as specified",
      "status": "PASS|WARNING|FAIL",
      "message": "Rule-based check result"
    },
    {
      "parameter": "Lumiflavin",
      "value": "0.05",
      "unit": "as specified",
      "status": "PASS|WARNING|FAIL",
      "message": "Rule-based check result"
    },
    {
      "parameter": "Lumichrome",
      "value": "0.03",
      "unit": "as specified",
      "status": "PASS|WARNING|FAIL",
      "message": "Rule-based check result"
    },
    {
      "parameter": "TotalImpurities",
      "value": "0.5",
      "unit": "as specified",
      "status": "PASS|WARNING|FAIL",
      "message": "Rule-based check result"
    }
  ],
  "criticalFindings": [],
  "sourceFile": "input.csv"
}

9. OQ/PQ test scenarios

ID	Scenario	Expected result
TC-001	Valid CSV with expected header and sample row	All rows are processed; output contains PASS/WARNING/FAIL and parameter-level detail.
TC-002	A mandatory input.csv column is missing	Import is rejected or the row receives FAIL with schema reference.
TC-003	A numeric field contains text or a blank value	Type conversion error is recorded; the result is not hidden as PASS.
TC-004	A parameter is outside specification or critical limit	Critical parameters produce FAIL; non-critical deviations produce WARNING according to the rule.
TC-007	Residual solvent above applicable limit	FAIL is produced with solvent name and measured value.

10. QA/QC, CSV and change control

Before production use, the client records executable version, checksum, specification/monograph version, test CSV, expected JSON and IQ/OQ results.
Column names must not be changed without updating the validator and test scenarios.
The source CSV, output.json and utility version should be stored together as an evidence package.
Any change in control rules must go through change control and repeated OQ scenario verification.

Included in packages

Ophthalmology QC Suite

QC package for ophthalmology: eye drops, antiglaucoma agents, antibiotics, sterile solutions, osmolality, pH, particles and preservatives.

Open

Vitamins & Minerals QC Suite

Quality-control package for vitamins, minerals, premixes and nutrient substances.

Open